Annular Cylinder Install

Annular cylinder installed with the HPD spacer. Took a little fitting as the spacer was drilled for 1/4 studs on the Swifts. My gearbox has 5/16 threads, so a little work with the drill press was required to make everything fit happily. Seems like even the simple jobs like this can stretch into a couple fo hours...

Engine all prepared for mating up the gearbox. See the cleverspacer that Eric fabricated to tie together the assembly at the bottom. The spacer has hidden fastners that affix it to the engine pan and studs that go through the Citation bellhousing to tie them together.